Pricing

And Ordering Information Is Now Available On-Line

At Our E-Commerce site:

www.TeamPCTechnology.com

Search for the product model number that you are interested in.

 

Continue To Scroll Down This Page For Product Information Only.

 

GPIB PC HS-NT+

DISCONTINUED  GPIB PC HS-NT+ 8 Bit Interface Card

  • GPIB drivers available for Microsoft® MS-DOS® and compatibles, Microsoft® Windows®  3.x, Windows®  95/98, Windows NT® and Windows® 2000 operating systems.
  • > 1 Mbyte/sec transfer rate.
  • Usage of  iGPIB chip enhanced mode in driver provides:
    • Full synchronous operation, by chip design
    • 510 byte FIFO for handling complete SCPI strings in one step.
    • Hardware Time-out counter.
    • Extended EOS byte handling.
  • Supports any application that uses VISA / SICL (Standard Instruments Control Library), for example HP VEE, HP BASIC, LabVIEW and HT Basic.
  • For application's compatibility and programming language support, see list
  • Language and application support is extended due to market needs: If you look for something special, contact ines.
  • Heat tested and burn-in.
  • Options - Please call for availability:
    • GPIB drivers for the operating systems Microsoft Windows® CE, IBM OS/2, SCO UNIX, MAC OS, Sun Solaris and HP-UX.
    • "IEEE488.2 Device Driver" for VxWorks, pSOS, OS9 + 9000, LynxOS, VMEbus, VXIbus, PC/104 bus, GTXI® etc.

Features

The ines GPIB PC HS-NT+ interface card uses the enhanced features of the ines iGPIB chip in conjunction with solid state ISA bus technology.
The interface system for Microsoft® MS-DOS® and compatibles, Windows® 3.x, Windows® 95/98, Windows NT® and Windows® 2000 operating systems completely supports the IEEE 488.2, SCPI and HP SICL/TULIP standard.
The interrupt lines 2..7 are selectable, the card can perform 8 bit DMA transfer.
It is operated as system controller in all computers.
This card is also available in a low-cost version without iGPIB chip.

Overview

The interface system for Microsoft® MS-DOS®, Windows® 3.x, Windows® 95/98, Windows® NT and Windows® 2000 operating systems completely supports the IEEE-488.2 and SCPI standard and may be operated as system controller in all computers. Using Windows® 95/98, Windows NT® and Windows® 2000, the HP SICL/TULIP standard is supported as well.

The main goal during the development of the interface series was to create a system that uses a well-known user interface and set of commands for all high level languages. This led to the decision to use the HP syntax (Hewlett Packard® / HP-Basic) for the command structure.

The NT driver package works with Windows NT®  operating system versions 3.51 and 4.0. Although Windows NT® incorporates a different driver concept than Windows® 95 , the user and application language interfaces are retained, differences within drivers are hidden. This applies for the Microsoft® Windows® 2000 operating system too.
There are a number of software packages available, for further information, contact ines.

IEEE488 Windows Software Package

Simple software installation and automatic hardware test

All software is installed by the Ines setup program. Just type 'a:setup' and all necessary drivers, application and program language interfaces are copied from disk.
Furthermore, the interface card can be tested.
A convenient feature is the uninstall option, that enables you to completely remove the installed software without side effects, even drivers in the Windows directories are removed properly.

ines software complies full with Microsoft® Windows® operating systems requirements and 32 bit application programs (e.g. HP-VEE 5.0). Execute 'setup' and the product will be installed in a few minutes.

Components

The Ines IEEE488 software package consists of low level drivers and a set of DLLs (Dynamic-Link-Libraries) for interfacing to programming languages and applications. There are also applications provided, like the Hardware Test that checks the card and looks for attached GPIB devices and the Interactive Control Program called WALI (Windows Advanced Look to IEEE) that is well suited to experiment with the GPIB bus without the need of an installed programming language.

Online Manual

The Online Manual completes the package. Printed documentation is out of date at the time it is printed. Only Online documents can be updated as needed. Another advantage is the full text search feature that leads to the information quicker than a printed index.

IEEE488.2 Device Driver

Especially for the use as device (Talker/Listener interface) Ines offers an "IEEE488.2 Device Driver" software. The device driver is compatible with all major operating systems such as VxWorks®, LynxOS, pSOS, OS/9, OS/9000 etc. The device driver is available as 'C' source code for all processors (Intel, HP, Motorola, Sun etc.) on the market.

IEEE488 DOS Software Package

In the days of graphical environments and GUI interfaces, DOS seems to be a little out of date. But for good reasons, it will remain in the next years: Real-time capability, at least to some degree, simplicity, lightweightness, quick installation and years of experience using DOS make it valuable. For these reasons, Ines continues supporting DOS. For using the PCMCIA card, additional Card Services are required.

The DOS Software Package consists of the device drivers that are installed in 'config.sys', the IEEE488.2 basic I/O system, the programming language interfaces and the application interfaces. The Interactive Control Program ALI is suited to experiment with the GPIB bus without the need of an installed programming language.

The Ines ieee488.2-BIOS

To be able to achieve high transfer rates, the software is split into the command interpreter and the BIOS. The Ines ieee488.2-BIOS contains IEEE-488.2 routInes optimized for speed. The user can use interrupt calls to gain access to the ieee488-BIOS and achieve high transfer rates in programmed I/O. This transfer performance is generally adequate in the practice as it greatly exceeds what most measurement devices are capable of transferring. 

The Ines ieee488-C-Library

For the 'C' programming language a special C-Library was developed. This way the ieee488 driver with all commands becomes part of the according 'C' dialect. The C-Library is available for DOS and Microsoft® Windows® operating systems.

LPT and COM redirection

The automatic redirection of all LPT and COM interfaces can be done with a simple PRINTER command. Easy to use file transfer Direct data transfer between systems, for example between two computers, is accomplished with the ENTFILE and OUTFILE commands. With the help of these functions, it is possible to transfer data files of any size from one hard disk to the other.

Memory management

Ines-ieee488 offers commands such as MEMSET, INMEM, and MEMVEC to reserve main memory in the computer for storing measurement values. This considerably reduces the programming which needs to be done. Reserving memory protects the measurement values from being overwritten by other data.

Interactive supervision and control

Ines-ieee488 offers an interactive program to quickly gain experience with the measurement devices attached to the system. With the communication program ALI (Advanced Look to IEEE), you can create complex command sequences, set up loops, wait for an SRQ before accessing a measurement device, or read and transfer data directly into a data file with the name specified in the ENTFILE command.

Software/Drivers

Operating
System
Application's compatibility Programming language support
DOS All GPIB applications written originally for the NEC µPD 7210c

GfS Dia/Dago PC

Keithley Asyst

NI LabWindows

Basica
Better Basic
GW Basic
Microsoft® Quick Basic
Microsoft® Visual Basic®
Power Basic
TransEra HT-Basic
True Basic
Turbo Basic
Borland Turbo C
Lattice C
Microsoft® C
Quick C

Fortran 77
Microsoft® Fortran
Professional Fortran

Borland Turbo Pascal
Microsoft® Pascal

16 bit

Windows® 3.x
Windows® 95/98 using 16bit applications

All GPIB applications written originally for the NEC µPD 7210c.

All applications that use 16 bit VISA/SICL interface.

DaDisp
DaDisp488

Datalog DASYLab
GfS Digis and DIAdem
HP BenchLink
HP VEE
Keithley/CEC TestPoint
LabTech Notebook
National Instruments LabWindows®
National Instruments LabView®
National Instruments Measure
HP Basic for Windows
Microsoft® Visual Basic®
TransEra HT-Basic

Borland C++
Microsoft® Visual C++®

Borland Turbo Pascal

32 bit

Windows® 95/98
Windows NT®
Windows® 2000

All GPIB applications written originally for the NEC µPD 7210c.

All applications that use 32 bit VISA/SICL interface.

DaDisp488

Datalog DASYLab
GfS Digis and DIAdem
HP BenchLink
HP VEE
Keithley/CEC TestPoint
LabTech Notebook
National Instruments LabWindows®
National Instruments LabView®
National Instruments Measure
HP Basic for Windows
Microsoft® Visual Basic®
TransEra HT-Basic

Borland C++
Microsoft® Visual C++®

Borland Turbo Pascal / Delphi

Linux     See Linux page

 

Ordering Information

GPIB PC HS-NT+ GPIB PC HS-NT+ 8 Bit Card Interface DISCONTINUED

Accessories

Strain Relief Kit, Terminal Block, Cables, etc.

 

Please E-mail Or Call For Pricing, Lead Time And Shipping Fees.
sales@team-solutions.com



Phone: 949.348.7766 • Fax: 949.348.7776
Now Accepting


Copyright Team Solutions 2001
Problems with aTeamSolutions.com, Team-Solutions.com, please email:
webmaster@team-solutions.com

No information here may be reproduced or distributed in any form or by any means without prior permission
from TEAM Marketing, TEAM Solutions Laguna Hills, California, USA.
Please report trouble with the web pages to the webmaster. Thank you.

This site was designed by Duncan Asper 949 458-0477 @ www.whitespace.ws

All trademarks used in this data sheet are registered trademarks of the relevant firms. LabView® and LabWindows® are registered trademarks of National Instruments Corp.
Microsoft® Windows®, Windows NT®, Visual Basic® and Visual C++® are either registered trademarks of Microsoft Corporation in the United States and/or other countries.
Our continuous product improvement makes specifications subject to change without notice.