And Ordering Information Is Now Available On-Line

At Our E-Commerce site:

Search for the product model number that you are interested in.


Continue To Scroll Down This Page For Product Information Only.




625 KS/s 12-bit 16-Channel ADC, Dual 12-bit DAC  DAQ PC Card


The MF236 is a versatile high speed Data Acquisition PC Card.  It can digitize with a resolution of 12-bits at up to 625KSamples/s.  The MF236 adds to the functionality of the AD136 card by incorporating digital to analog converters for two lines of analog output. The card comes with Win32 application source code, device drivers and full register programming details.  Some of its features are listed below.

Technical Features

12-bit 625KSample/s successive approximation A-to-D  converter with excellent noise performance and up to 11.2 effective bits of resolution.  The sample rates are programmable for continuous sampling as well as allowing conversions under host software control.
16-channel fault protect input mux, with channel scanning logic, and switchable between single-ended and differential topology.
20 software programmable inputs ranges from +/-10V to +/-625mV.  Unipolar and bipolar modes are globally software selectable.
A-to-D data flows into a large 16KSample FIFO on-card.  The FIFO can be run in continuous streaming mode (throughput is PC speed dependent) but can also serve as a capture buffer for triggered acquisitions. This is similar to a digital storage oscilloscope, with level and edge triggering against a digital 8-bit threshold in hardware, and programmable pre or post triggering to allow waveform capture before/after a trigger event.  These features are seldom found in PC Card DAQ solutions, making this card unique in its class.
A digital trigger input is also provided to allow burst acquisition to be triggered by an external event or process.
Dual 12-bit D-to-A converters (low speed type) with +/-10V and 0 to 5V output ranges.
4 general purpose digital I/O lines are available for control and status monitoring, each being programmable as input or output and having TTL compatible input thresholds, and CMOS type output drive capability.
Power is available at the edge connector for signal conditioning, powering sensors etc.
Card comes with Elan's Card Center Pro software with kernel driver and data handling module, plus a top level Win32 GUI with source code to act as a starting point for your own development.  Full hardware register data is provided to allow exact tailoring for bespoke applications.
Drivers for DOS, Win9x, Me, NT4, 2000, XP. (DOS support requires Card and Socket Services e.g. SystemSoft or Award).
Automatic O.S. recognition and configuration.  Hot swappable PCMCIA 2.1+ compliant TypeII design.
Power consumption: Typical 200mA at 5V fully active, with support for reduced power sleep mode of typ. 20mA at 5V under host application software control.
Input mux channels can withstand voltages up to +/-35V with the card powered or not.
Supplied with 1m Type30 cable.  Connector latches into PC Card for security. Terminates to DB37 Female with male screw jacks.  Custom cabling available on request
Can be fitted with a unique Strain Relief Assembly to ruggedize the PC Card to cable connection (optional extra), product code "TSRA1-DAQ"

Ordering Information

TS-C-MF236 625 KS/s 12-bit 16-Channel ADC, Dual 12-bit DAC DAQ PC Card Pricing And Online Ordering At  Search For: mf236
TS-C-AD136 625 KS/s 12-bit 16-Channel ADC DAQ PC Card Pricing And Online Ordering At  Search For: ad136


Contact Us For Cables, Terminal Blocks and TSRA1-DAQ Strain Relief


Please E-mail Or Call For Pricing, Lead Time And Shipping Fees.

Phone: 949.348.7766 • Fax: 949.348.7776
Now Accepting

Copyright Team Solutions 2001
Problems with,, please email:

No information here may be reproduced or distributed in any form or by any means without prior permission
from TEAM Marketing, TEAM Solutions Laguna Hills, California, USA.
Please report trouble with the web pages to the webmaster. Thank you.

This site was designed by Duncan Asper 949 458-0477 @

All trademarks used in this data sheet are registered trademarks of the relevant firms. LabView® and LabWindows® are registered trademarks of National Instruments Corp.
Microsoft® Windows®, Windows NT®, Visual Basic® and Visual C++® are either registered trademarks of Microsoft Corporation in the United States and/or other countries.
Our continuous product improvement makes specifications subject to change without notice.