ATS5004D Automotive Diagnostic Scope
- High performance lab scope for the automotive technician
- Oscilloscope / Spectrum analyzer / Multimeter / Data logger
- 12, 14, 16 bit resolution
- 50 MS/s sampling
- 50 MHz bandwidth
- 128 KSamples memory per channel
- 100 ppm time base accuracy
- Safe measuring using differential inputs
- SureConnect on each channel
- Resistance measurement on each channel
- Fully supported by ATIS (Automotive Test and Information System)
Automotive oscilloscope with 4 differential channels, 50 MS/s, 12/14/16 bit, integrated SureConnect connection test, 128 kSamples memory per channel.
Safe measuring using differential inputs
The Automotive scope ATS5004D is a four channel automotive oscilloscope with differential inputs. With the differential inputs it is possible to measure four totally unrelated signals simultaneously. It is no longer possible to create a short circuit through the oscilloscope or through a second device connected to your computer and to the car, like e.g. a fault code scanner. So no risk of damaging the car, the oscilloscope or the computer.
SureConnect on each channel
The SureConnect connection test feature of the Automotive scope ATS5004D tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal. This is useful when surfaces are oxidized and your probe cannot get a good electrical contact. Simply activate the SureConnect and you know whether there is contact or not. Also when back probing connectors in confined places, SureConnect immediately shows whether the probes make contact or not.
Watch the SureConnect video on youtube at:
Resistance measurement on each channel
Many automotive sensors are based on variable resistors. Use your Automotive scope ATS5004D in the resistance setting to test them, no more need to take a separate ohm meter. Resistance values can be displayed as a number, but it is also possible to display the resistance variation in time, in a graph.
Fully supported by ATIS
All features of the Automotive scope ATS5004D are fully supported by ATIS, the Automotive Test and Information System. Select a specific diagnostic measurement in ATIS, click the measure button and the Automotive scope ATS5004D will be completely setup for that specific measurement and ready to perform it.
The Automotive scope ATS5004D comes with the following items:
1 - Carry case BT341
1 - Automotive scope ATS5004D
4 - Measure lead TP-C1812B, BNC -> 4 mm banana jack
4 - Differential attenuator TP-DA10
1 - CD-ROM with Multi Channel oscilloscope software and drivers
1 - instrument manual
1 - software user's manual
Program / Software Information
The universal software that is delivered with the ATS5004D turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.
Download all available literature, manuals and software at:
Digital Storage Oscilliscope (DSO)