HandyScope HS5: 500 MS/s 250MHz BW, 2 Channel, USB Digital Storage Oscilloscope, 40MHz AWG, Spectrum Analyzer, Voltmeter, Transient Recorder
- Oscilloscope / Spectrum analyzer / Voltmeter
- 14 bit (0.006 %) resolution (16 bit enhanced resolution)
- 500 MS/s sampling
- 250 MHz bandwidth
- Up to 64 MSamples memory per channel
- 0.25 % DC vertical accuracy
- 1 ppm timebase accuracy
- ***NEW! TiePie engineering Measurement Templates***
- Arbitrary Waveform Generator
- 1 microHz to 40 MHz sine, square, triangular and arbitrary waves
- 240 MS/s, 14 bit, 64 MSamples arbitrary waves
- -12 to 12 V output (24 Vpp)
- 1 ppm timebase accuracy
- Spurious (non harmonic) < -85 dB
- 8 ns rise and fall time
The Handyscope HS5 is the first USB oscilloscope (USB powered) sampling at 500 MHz, with a 14 bits resolution and a 250 MHz bandwidth. This makes it possible to analyze very fast signals with very small amplitudes. The smallest distortions can be revealed due to the high resolution and bandwidth. Because of the deep memory (up to 64 MSamples on one channel), long record measurements are available for intermittent phenomena and Fast Fourier Transform calculations with over 32 million spectral lines can be performed. Using very fast FFT algorithms, an FFT with 1 million spectral lines can be performed within a second.
Through the high integration density of the components used in the Handyscope HS5, the total size of the Handyscope HS5 is limited to 25mm x 170mm x 140mm (1" x 6.7" x 5.2"), making it very suitable for mobile use.
Highest timebase accuracy
The time base of the Handyscope HS5 is created from a very stable TCXO with a deviation under 1 ppm and a yearly aging less than 1 ppm. No other oscilloscope offers this accuracy. Measuring the frequency of a signal can be done very accurately. When a tolerance of 10 ppm is allowed, a recalibration of the time base is only required after 10 years of use.
Program / Software Information
The universal software that is delivered with the Handyscope HS5 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.
TiePie engineering Measurement templates
Perform advanced measurements in a few mouse clicks
When knowledge or experience are insufficient to setup a measurement instrument correctly and quickly, using measurement templates is a must. The TiePie engineering Multi Channel oscilloscope software provides a large amount of ready to use measurement templates. Most measurement templates are designed to allow perfoming an advanced mesurement in just a few mouse clicks.
How does it work?
You select the measurement template from a tree structure and the instrument will be fully set up. For an advanced CAN bus measurement simply select the measurement template (Protocol analyzer -> CAN bus -> 1 (differential) channel -> 250kb/s) and the instrument is ready to measure and decode CAN bus signals. The measurement template can also contain reference signals and comments on how to perform the measurement.
But also setting up the instrument correctly to perform simple measurements can take much time. A simple measurement like e.g. a current measurement using a 600 Ampere current clamp (TP-CC600) can give difficulties in determining and setting the correct conversion factor for the current clamp in the software. When using a measurement template, this is performed quickly and correct all the time.
For more information on the selected measurement template, an online link is available that provides extra information on the selected template.
A machine builder can create his own measurement templates for all test points that are important in a machine. Service engineers can then use these templates to immediately give them all correct settings,
reference measurement signals and an explanation with information on the test point. By using the templates, the instrument becomes a complete information system for the service engineer, enabling him to always use the correct settings for his measurements, together with the right information.
Try it yourself
The measurement templates are supplied for free with the Multi Channel oscilloscope and are indispensable for a quick and correct measurement. Experience the possibilities of the measurement templates and download the demo software from www.tiepie.com/software.
Even without downloading the demo software, the advantages of the measurement template system can be experienced at www.tiepie.com/software/MeasurementTemplates. This page provides an interactive simulation of the measurement template selection dialog, allowing you to browse the available measurement templates.
By using the measurement templates, using a complex measurement instrument has become easy and very accessible to any user.
Download all available literature, manuals and software at:
Digital Storage Oscilliscope (DSO)