MSO3124V: 6-in-1 DAQ, DSO, DVM, Frequency Counter, Logic Analyzer, Protocol Analyzer

$4,500.00

6-in-1 Instruments:
DAQ, DSO, DVM, Frequency Counter, Logic Analyzer, Protocol Analyzer
• PC-based, USB3.0 interface / powered (Type-A / Type-C)
• Total Memory:4 Gb
• Data Logger (HDD / SSD Storage)
• DSO:4 Channels (cascaded 4units up to 16 channels),
1 GS/s S/R, 200 MHz bandwidth
• Digital Voltmeter :3 digits
• Frequency Counter:5 digits
• Logic / Protocol Analyzer:16 Channels, 2 GS/s Timing Analysis,
250 MHz State Analysis

MSO3000 Model Channels Record Length/ch
(Analog / Digital)
Vertical Resolution
(Analog)
Trigger
(Analog / Digital)
Electrical Validation
(Protocol)
Acute MSO3K MSO3124E 4  128 / 256 Mpts 8 bits  Group I / I ---
MSO3124B  4 128 / 256 Mpts 8 bits Group I, II, Bus I / I, II ---
MSO3124H  4 128 / 256 Mpts 16 bits Group I, II, Bus I / I, II, III  ---
MSO3124V 4 128 / 256 Mpts 16 bits Group I, II, Bus I, II / I, II, III  I2C, ...

Analog : 4CH, 1 GS/s S/R, 200 MHz bandwidth
Group I : Edge, Either, External, Falling, Rising, Video, Width
Group II: Runt, Pattern/ State, Timeout, Transition, Setup/ Hold, B-Trigger, B-Event, Window
Bus I : BiSS-C, CAN 2.0B/CAN FD, DALI, DP_Aux[1], I2C, I2S, LIN2.2, Modbus, Profibus, SENT, SPI, SVI2, UART UART(RS232), USB1.1, ...
Bus II : SVI3[2], SVID[3]
[1] Optional DP_Aux adapter needed.
[2] Upon request by user who is approved by AMD. SVI3 Bus Trigger / Decode are supported ONLY by MSO3124V.
[3] Upon request by user who has signed CNDA with Intel. SVID Bus Trigger / Decode are supported ONLY by MSO3124V.

Digital : 16CH, 2 GS/s Timing Analysis, 250 MHz State Analysis
Bus Trigger I:CAN2.0B/CAN FD, HID over I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SENT, SPI, UART, USB PD 3.1, ...
Bus Trigger II:DALI, LPC, MDIO, Mini/Micro LED, MIPI RFFE 3, MIPI SPMI 2, PMBus, Profibus, SMBus, SVI2, ...
Bus Trigger III:eMMC 4.5, eSPI, MII, RGMII, RMII, SD 3.0 (SDIO 2.0), Serial Flash (SPI NAND), SVI3[2], SVID[3]
Protocol Analyzer I:CAN2.0B/CAN FD, HID over I2C, I2C, I2S, LIN2.2, MIPI I3C 1.1, SENT, SPI, UART, USB PD 3.1, ...
Protocol Analyzer II:DALI, MDIO, Mini/Micro LED, MIPI RFFE 3, Modbus, PMBus, Profibus, SMBus, USB1.1
Protocol Analyzer III:eSPI, MII, RGMII, RMII, SVI3[2], SVID[3]
Bus Decode:CAN 2.0B/CAN FD, DP_Aux[1], eSPI, I²C, I²S, MII, MIPI I3C 1.1, MIPI RFFE 3, MIPI SoundWire, SPI, SPI Flash, SVI3[2], SVID[3], UART, USB PD 3.1, ...(100+)
[1] Optional DP_Aux adapter needed.
[2] Upon request ONLY by users who have been authorized by AMD, SVI3 trigger & PA & Bus Decode supported by MSO3124H/V ONLY.
[3] Upon request ONLY by users who have signed CNDA with Intel, SVID trigger & PA & Bus Decode supported by MSO3124H/V ONLY.


Logic Analyzer (LA) Mode

  • MSO analog and digital channels can capture signals simultaneously.
    It can also stack an oscilloscope to compare digital and analog signals simultaneously, which is suitable for signal quality analysis.

    LA Storage Mode:
    Storage modeLong Time Record: Transitional Storage VS Compressed Storage
    For signal capture and analysis, usually require to record the signal for a long time. If the data is stored in a compressed way, it will cause your software to lag or even stop functioning when decompressing the data after it is sent back to the computer. Because PC memory size might insufficient for decompressed data size. To satisfy the requirement of smooth software operation and long-term recording without missing any data, the storage method adopted by the Acute analyzer is transitional storage rather than compression. After returning to the PC software, it doesn't need to do the decompression. The decoded results can be displayed while the analysis is finished.

    Compressed en
    Transition en
    Software Main Window
    MSO3K LA en 01
    Analog & Digital waveformMSO3K LA en 02
    Auto Threshold Settings:
    1.Auto Detect ALL
    2.Auto Detect 2 en
    3.
    Auto Detect 03 en

    Trigger Settings Window
    Trigger
    Multiple Protocols Analysis Simultaneously:
    Ex: I2C + USB PD3.0
    MultiProtocol

    MSO Stack With Other Vendors of Oscilloscope:
    (*Support DSO)SMBUS External DSO

    Stack DSO 1 Stack DSO 2

    MSO Enables Digital & Analog Channels (Using the same channels)
    SMBUS MSODigital & Analog Signals From MSO and External DSO From Other Vendors
    MSO DSO en*BUS_SMBUS: Decode & Digital Signals   *DSO: MSO Analog Signals   *Ext DSO: External DSO Signals

    Add Notes & Pictures in WaveformNote
    Power Management Protocols Solution for MSO
    Ex: PMBus(CH0 & CH1) & The Related Power Voltage(CH2) (*Digital CH0, CH1    Analog: CH2 )
    Power Management


  • Protocol Analyzer (PA) Mode
    It is hardware decoding, may log protocol data very long time if without waveforms.
    Application timing: Preliminary protocol debug.PA Storage Mode:PA Storage Type
    Software Main Window:PA MODE

 

■ Certification
CEFCC

Additional information

Weight 2.1 lbs
Dimensions 10 × 8 × 5 in